Language
Two Zone Thermal shock test chamber is engineered to evaluate the ability of material structures and composites to withstand rapid and extreme temperature changes. This system exposes materials to both high and low temperatures in quick succession, testing for potential expansion, contraction, and any resulting chemical or physical damage.
Product Description:
The chamber is available in two configurations:
Dynamic Shock (Two-Chamber Type): The sample moves between the high and low-temperature chambers.
Static Shock (Three-Chamber Type): The sample remains stationary as the temperature alternates in the testing zone.
Both configurations simulate rapid atmospheric temperature changes, enabling comprehensive adaptability testing, reliability screening, and safety evaluation of materials and components.
This system is widely used in Aerospace, Electronics, Materials, Science, Instrumentation, Components Testing
Two-Zone System: Divided into high-temperature, low-temperature, and testing zones. The test sample remains static, ensuring precision in thermal shock exposure.
Touch-Control Graphical Interface: The intuitive touch-screen control panel simplifies operation and test programming.
Wind Route Conversion: Distributes temperature efficiently for accurate cold and heat shock measurement.
Extended Testing Duration: Capable of conducting tests for up to 999 hours, with a maximum of 9999 circulation cycles.
Automated & Manual Testing Modes: Users can choose between automatic Circulation Shock or manual selective shock settings, offering flexibility for different testing requirements.
Efficient Cooling System: Utilizes a binary cooling system for rapid cooling. The cooling method is water-based, ensuring high efficiency.
Communication Interface: Equipped with RS-232 and RS-485 communication ports for enhanced data connectivity and system control.
For more information or to inquire about this product, contact us at: Contact@aslitesting.com
Model | TS-42(A~C) | TS-80(A~C) | TS-150(A~C) | TS-252(A~C) | TS-450(A~C) | |||
Internal Dimension WxHxD ( mm) | 400x350x350 | 500x400x400 | 600x500x500 | 700x600x600 | 800x750x750 | |||
External Dimension WxHxD (mm) | 1400x1800x1400 | 1550x1950x1550 | 1600x2000x1700 | 1700x2100x1750 | 1800x2200x1900 | |||
Temperature Range of Testing zone | Type A:-40 ℃~+150℃ (200℃ is Optional) | Type B:-55℃ ~+150℃ (200℃ is Optional) | Type C:-65℃ ~+150℃ (200℃ is Optional) | |||||
| High temperature Range of Testing zone: +60℃~+150℃(200℃ is Optional); Low Temperature Range of Testing Zone: -10℃~-40℃/-55℃/-65℃ | |||||||
Exposure Time of High/Low Temperature | Exposure Time of High Temperature:+60℃~+150℃(200℃ is Optional) 30Mins | |||||||
| Exposure Time of Low Temperature:-10℃~Type A:-40℃/ Type B -55℃/ Type C -65℃ 30Mins | |||||||
Temperature of Heat-Storing Slot/Heating Time | RT~200℃/About 45mins | |||||||
Temperature of Cool-storing Slot/Cooling Time | RT~-75℃/ About 100mins | |||||||
Temperature Recovery Time/ Conversion Time | ≤5min/≤5sec | |||||||
Control Accuracy / Distribution Uniformity | ±0.5℃/±2℃ | |||||||
Internal and External Material | Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or SEE cold-rolled steel with paint coated. | |||||||
Insulation Material | High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materials | |||||||
Mechanics | P.I.D+S.S.R+ Micro-computer balanced temperature control system | |||||||
Cooling System | Semi-hermetic double-stage compressor(water-cooled type) /Hermetic double-stage compressor (air-cooled type) | |||||||
Security Protection Devices | Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator high-pressure protective switch, failure warning system, electronic alarm | |||||||
Accessories | viewing window(special order) | |||||||
Compressor | French “Tecumseh” Brand, Germany Bizer Brand | |||||||
Power | AC220V 1∮ 3 lines,50/60HZ, AC380V 3∮ 5 lines,50/60HZ | |||||||
Weight (Approx) | 450 | 600 | 750 | 950 | 1200 | |||
