Home

/

Product Center

/

Reliable PID Tester for Assessing Solar Panel Degradation and Performance
PID-chamber1.jpg
PID-chamber2.jpg
Reliable PID Tester for Assessing Solar Panel Degradation and Performance
Short Description: With more and more photovoltaic applications and larger scale of power stations, more and more problems of solar cell modules have been exposed, such as power reduction, poor insulation and delamination.  After years of research, it has been found that a large part of the problems in the application process of components is due to leakage current between the internal conductor and the ground (through the border).  Long-term leakage current will cause changes in the state of the carrier and depletion layer of the cell, corrosion of the contact resistance in the circuit, electrochemical corrosion of the packaging material and other problems, resulting in power attenuation of the cell, increase of series resistance, reduced light transmittance, delamination and other phenomena affecting the long-term power generation and life of the component.
Function
PID TESER /PID POWER SUPPLY UNIT
Functional features
l The photovoltaic module frame end is grounded, which not only simulates the actual situation, but also prevents the potential danger caused by the frame high pressure in the testing process;
l For each component, the 4-wire test method is adopted, 2 high-voltage wires and 2 ground wires. The high-voltage wires are connected with the components internally through the junction box, and the ground wires are connected with the frame or connected in other effective positions.
l Each channel is independent of each other, the polarity of the voltage of each channel and the time can be set separately;
l Voltage, leakage current, insulation resistance display at the same time;
l Real-time monitoring of voltage, leakage current, insulation resistance curve;
l The screen shows the test situation and records the data in the test;
l All monitoring data can be exported in Excel, CSV, and other formats
l Enter the component serial number, test period, and test name to query historical data and curves
l Alarm parameters are set separately, such as overcurrent alarm and undervoltage alarm.
Technical parameters
power supply:
l Voltage range: -2000 ~ 2000V;
l Voltage accuracy: 0.5%FS;
l Voltage resolution: 1V;
l Current capacity: 10mA;
Current Sensor:
l Test range: -1 ~ 1mA;
l Test accuracy: 0.5%FS;
l Resolution: 0.001mA.
Data acquisition card
l Support RS485 communication, support 0-5V, 0-10V, 4-20mA signal input
l 14 bit resolution
l 20 analog input
l T /C software configuration, low voltage and current input
l Isolation voltage: 3000 Vdc
l Support Modbus/RTU control
l DC24V power supply
industrial computer
l Control cabinet: 4U standard cabient;
l Power supply: 300W;
l Baseplate: 14S4 (including 4PCI slot);
l Long card: ANOVO 7865L CPU;
l Memory: 4G DDR;
l Hard disk: 1 TB;
l CD-ROM: DVD-ROM;
l Monitor: Dell-IN1940MW.
Cables
l Material: silica gel;
l Pressure grade: 25KV;
l Core diameter: 0.5mm², multi-strand copper wire;
l Operating temperature: -60-250℃;
l Outer diameter: 5.8mm;
l Length: standard 6m/ set;
Parameter
Detailed Photos
PID-chamber-describe1.jpgPID-chamber-describe2.jpgPID-chamber-describe3.jpgPID-chamber-describe4.jpgPID-chamber-describe5.jpgPID-chamber-describe6.jpg
Established in 1988, AI SI LI (China) Test Equipment Co., Ltd is specialized in manufacturing a variety of quality inspection instruments.
Email: contact@aslitesting.com
Phone: +86-769-23164266
Address: Building C, JinHui Industrial Park, LiXin Town, East City District 523125, DongGuan City, China

Leave Message

Thanks for your information.ASLi team will response toyou asap

Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved